Note: You must back you the Program before you do the following as the new E-Prom will erase you program and all settings will be factory default. You must also set the Ram allocation before you send the program back into the machine.
In order to down load the E-prom on the No-Name you must follow the steps below;
Plug in the Com cable from PC to the Till.
Run the Up- loader Tool
Set the Setting in the utility as the for the com board rate 34800 Parity= None, Bits = 8, stop=1
Then Power off and unplug the machine
Then press the boot button
NOW HOLD DOWN 1&9 ON THE KEPAD THEN PLUG THE POWER OF THE MACHINE BACK INTO THE SOCKET. (YOU SHOULD HEAR 2 BLEEPS.)
Erase the Eprom
Upload ECR 192 from our documents where you have saved the E-prom from the disk.
VERSION and press RUN
In S MODE set the following in the RAM ALLOCATION
Now set the RAM Allocation to the following;
ITEMS PER TABLE= 50
THEN SELECT CHANGE LOCATION
How to set-up a function key in No- Name 1
In order to set up Function keys for the No Name 1, you must follow the following steps below,
Step 1- Go into S-Mode and then function keys.
Step 2- Select the button that you wish to place the function key.
Step 3- Press 5 subtotal, 0 subtotal, 0 subtotal and then 79 for cash key and then enter