The SPS2000 supports the connection of a Cas PDII scale from eprom Version 1.60 or above. Following are the setup instructions to connect the SPS2000 and scale with details on how to operate this.
It should be noted if connecting to an existing PDII this will require an upgrade which can be obtained from your provider, and once upgraded the scale will need recalibrating using a complete weight set 15Kilo. The scale also requires setting to Type 4. To set, power off the scale and hold the TARE key. Power on and press the * key to change to Type 4, press the ZERO key to finish.
Please note when backing up a program to SD card from an SPS2000 V1.50 and loading to the V1.60 or above EPROM, do not transfer the P mode system options, these will need to be entered manually.
Defining the Port
In S-mode select Define Port
Choose the Port the Cas Scale will be connected to by pressing Serial Port #1 in the top left hand corner
Ensure the follow options are set:
Select Device then press Scale and ensure CAS PDII is selected
Press OK to exit
Programming the PLU Status Group
Select the P-mode tab followed by the PLU option.
Press the PLU Status Group button and select the Status Group that will be set as Scaleable.
Select the Option#2 tab
Set Option 13. Is PLU Scaleable? and Option 14. Auto Scale on this PLU? to Yes
Press Close to Exit
Programming the PLU’s
Within P-mode select the PLU option followed by PLU Add & Change
Select the first PLU to be Scaleable
Select the PLU Status Group Link # option and enter the number of the Status Group which has previously been set as scaleable.
Select the Prices tab and ensure the Price per Kilo is set in the PRC/HALO field
Repeat this for all PLU’s which need to be Scaleable